There is a script to lunch to connect and to disconnect. One channel device doesn’t require an external power supply. As you can see I have choosen to insert PointToPoint options into the kernel and not compile them as modules. The PCB version is reported on the case label. It can be used as backup line when the main one fails, or to establish a connection toward Internet when calling an ISDN number data call back. If you download the package and follow the instructions you could be able to use your modem. Author Write something about yourself.

Uploader: Zoloshura
Date Added: 27 October 2009
File Size: 13.30 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 90747
Price: Free* [*Free Regsitration Required]

The documentation is very clear and there are also translaction in various languages. Jumpers position on PCB.

am4computers – Aethra Starmodem UM – ADSL USB Modem – Built-In Splitter – – EGYPT

For my experience both driver works fine. One channel device doesn’t require an external power supply. Each output is available both as normally closed and normally open.

The IO part offers 8 digital inputs, 4 digital outputs clean contacts and two analog inputs available only if an analog adaptation module is present. It is installed on the board and it’s able to switch each LINE port to the correspondent main port or backup port.

Свежие записи

Installation Classiquement l’installation est la suivante: Allora una volta configurati i dati nome, password,impostazioni Instead if you want to use this modem with Linux you have to know the chipset of your modem. Retro there can be a referral driver modem aethra starbridge-eu you take Cheap Ralph to a life to work that May position or something.


Led Meaning State Power Power state. The status of the relays RA and RB follows the one of the communication. Led indications for Thomson Speedtouch. If you download the package and follow the instructions you could be able to use your modem.

There are two versions of this driver. All the option can aethga setted easily. Apple may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Apple can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums.

Gentoo Forums :: View topic – quasi [OT] aethra starmodem e gentoo

I will publish this little changes to apply. Hi to all, I m going to buy an Airport Espress, but before I would like to know if I can use it, connecting the ethernet output of the modem Aethra Starbridge with.

The PCB version is reported on the case label. Modem-router Aethra starbridge EU. RJ Switch – Block scheme. Aethra Starmodem which uses the USB isochronous mode for the downstream. The volume of the microphone and the speaker can be manually regulated with the corresponding trimmers, all of which are externally accessible on the front. A french translation of the previous link has been inserted below in the box.


It is a classic driver and for this reason it is more suitable for linux users. Connecting a power supply providing more than 5V-DC damages the device! Auxiliary pin, leave disconnected if unused connect to MIC in a special BTicino connection scheme, in order to provide power to the Microphone line. Up to 6 modems can be installed into the same Abilis. I have tested the driver with slackware 9. After this change, you can compile the driver and follow the instruction of the maual written only in french.

Each input will cause to dial a different number.

Citobox trimmers and pinout. Citobox – Front view. This device checks the keepalive, so if the master Mx doesn’t reply to the keepalive signal, the link is assumed to be down and the line is switched to the backup device Bx until the link is up again.